Men’s warm and waterproof snow hiking boots, NH500
Fancy some wide open spaces? These warm, waterproof boots are designed for regular hiking in freezing conditions, offering protection and comfort.
Can I be sure that my boots are warm enough for my winter hikes?
We chose a warm lining that has insulation to give you effective protection from the cold. We tested it in the laboratory and in the field with our user representatives. We checked the temperature down to which it stays comfortable when you're stationary and when you're walking, as this varies a lot: -8°C when static and -17°C when moving. We also took into account how temperature is felt differently by men and women.
How do my boots protect me from outdoor conditions?
Your boots have been designed with a 100% waterproof mid-height inner shoe to protect the part of the foot most in contact with the snow. The textile upper is water-repellent and warm to give you good protection against cold and snow ingress. Seams mean that the join of the inner shoe and those of the upper are not waterproof. In very deep snow, water can, over time, get in through the seams and wet the foot.
What is the difference between traction and grip?
The boots’ traction depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot. Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.
Which type of grip and traction does this boot provide?
Your boots, which are equipped with SNOWCONTACT soles, have been designed for maximum comfort in terms of grip for hiking and traction on snow. The location and height of the studs (3.5mm) are spaced strategically for optimal grip when hiking on snow The surface and layout of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to avoid slipping.
SNOWCONTACT technology
SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.
Will my boots withstand regular use over the long term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. As a result, the fabric does not soak up water & stays light, breathable & warm. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the the boot. Products (spray or liquid) for this purpose are available in our stores.
Our tips on use and care
Shoes can become heavy while they’re being worn in the wet (condensation and perspiration) If your boots are very wet, we advise you to remove the insole, fill the upper with balls of newspaper and change them regularly. The paper will pump out moisture and speed up drying. Never place your shoes too close to a heat source but leave them in a warm, dry and ventilated place.
How to dry the inside of your boot.
In use, the boot can become damp (condensation and perspiration) If the boot is very wet, we advise you to remove the insole, fill the upper with newspaper balls and change them regularly. The paper will pump out moisture and speed up drying. Never place your boots too close to a heat source but leave them in a warm, dry and ventilated place.
Easy to slip on, these waterproof boots provide a perfect fit thanks to their full lacing system. The Snowcontact sole ensures excellent grip on both packed snow and deep powder.
Warmth
Comfort temperature – when stationary: -8°C while moving: -17°C
Waterproof
100% waterproof low cradles with a water-repellent upper for deep snow
Grip
Grip with SNOWCONTACT technology: materials and tread pattern of the soles
Traction
Traction on snow thanks to the location and depth of the 4mm studs
Easy opening / closing
Laces cover the whole upper. Boots open fully, they're quick & easy to put on!
Fancy some wide open spaces? These warm, waterproof boots are designed for regular hiking in freezing conditions, offering protection and comfort.
Original: $87.64
-65%$87.64
$30.67More Images
Men’s warm and waterproof snow hiking boots, NH500
Fancy some wide open spaces? These warm, waterproof boots are designed for regular hiking in freezing conditions, offering protection and comfort.
Can I be sure that my boots are warm enough for my winter hikes?
We chose a warm lining that has insulation to give you effective protection from the cold. We tested it in the laboratory and in the field with our user representatives. We checked the temperature down to which it stays comfortable when you're stationary and when you're walking, as this varies a lot: -8°C when static and -17°C when moving. We also took into account how temperature is felt differently by men and women.
How do my boots protect me from outdoor conditions?
Your boots have been designed with a 100% waterproof mid-height inner shoe to protect the part of the foot most in contact with the snow. The textile upper is water-repellent and warm to give you good protection against cold and snow ingress. Seams mean that the join of the inner shoe and those of the upper are not waterproof. In very deep snow, water can, over time, get in through the seams and wet the foot.
What is the difference between traction and grip?
The boots’ traction depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot. Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.
Which type of grip and traction does this boot provide?
Your boots, which are equipped with SNOWCONTACT soles, have been designed for maximum comfort in terms of grip for hiking and traction on snow. The location and height of the studs (3.5mm) are spaced strategically for optimal grip when hiking on snow The surface and layout of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to avoid slipping.
SNOWCONTACT technology
SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.
Will my boots withstand regular use over the long term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. As a result, the fabric does not soak up water & stays light, breathable & warm. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the the boot. Products (spray or liquid) for this purpose are available in our stores.
Our tips on use and care
Shoes can become heavy while they’re being worn in the wet (condensation and perspiration) If your boots are very wet, we advise you to remove the insole, fill the upper with balls of newspaper and change them regularly. The paper will pump out moisture and speed up drying. Never place your shoes too close to a heat source but leave them in a warm, dry and ventilated place.
How to dry the inside of your boot.
In use, the boot can become damp (condensation and perspiration) If the boot is very wet, we advise you to remove the insole, fill the upper with newspaper balls and change them regularly. The paper will pump out moisture and speed up drying. Never place your boots too close to a heat source but leave them in a warm, dry and ventilated place.
Easy to slip on, these waterproof boots provide a perfect fit thanks to their full lacing system. The Snowcontact sole ensures excellent grip on both packed snow and deep powder.
Warmth
Comfort temperature – when stationary: -8°C while moving: -17°C
Waterproof
100% waterproof low cradles with a water-repellent upper for deep snow
Grip
Grip with SNOWCONTACT technology: materials and tread pattern of the soles
Traction
Traction on snow thanks to the location and depth of the 4mm studs
Easy opening / closing
Laces cover the whole upper. Boots open fully, they're quick & easy to put on!
Fancy some wide open spaces? These warm, waterproof boots are designed for regular hiking in freezing conditions, offering protection and comfort.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fancy some wide open spaces? These warm, waterproof boots are designed for regular hiking in freezing conditions, offering protection and comfort.
Can I be sure that my boots are warm enough for my winter hikes?
We chose a warm lining that has insulation to give you effective protection from the cold. We tested it in the laboratory and in the field with our user representatives. We checked the temperature down to which it stays comfortable when you're stationary and when you're walking, as this varies a lot: -8°C when static and -17°C when moving. We also took into account how temperature is felt differently by men and women.
How do my boots protect me from outdoor conditions?
Your boots have been designed with a 100% waterproof mid-height inner shoe to protect the part of the foot most in contact with the snow. The textile upper is water-repellent and warm to give you good protection against cold and snow ingress. Seams mean that the join of the inner shoe and those of the upper are not waterproof. In very deep snow, water can, over time, get in through the seams and wet the foot.
What is the difference between traction and grip?
The boots’ traction depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot. Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.
Which type of grip and traction does this boot provide?
Your boots, which are equipped with SNOWCONTACT soles, have been designed for maximum comfort in terms of grip for hiking and traction on snow. The location and height of the studs (3.5mm) are spaced strategically for optimal grip when hiking on snow The surface and layout of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to avoid slipping.
SNOWCONTACT technology
SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.
Will my boots withstand regular use over the long term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. As a result, the fabric does not soak up water & stays light, breathable & warm. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the the boot. Products (spray or liquid) for this purpose are available in our stores.
Our tips on use and care
Shoes can become heavy while they’re being worn in the wet (condensation and perspiration) If your boots are very wet, we advise you to remove the insole, fill the upper with balls of newspaper and change them regularly. The paper will pump out moisture and speed up drying. Never place your shoes too close to a heat source but leave them in a warm, dry and ventilated place.
How to dry the inside of your boot.
In use, the boot can become damp (condensation and perspiration) If the boot is very wet, we advise you to remove the insole, fill the upper with newspaper balls and change them regularly. The paper will pump out moisture and speed up drying. Never place your boots too close to a heat source but leave them in a warm, dry and ventilated place.
Easy to slip on, these waterproof boots provide a perfect fit thanks to their full lacing system. The Snowcontact sole ensures excellent grip on both packed snow and deep powder.
Warmth
Comfort temperature – when stationary: -8°C while moving: -17°C
Waterproof
100% waterproof low cradles with a water-repellent upper for deep snow
Grip
Grip with SNOWCONTACT technology: materials and tread pattern of the soles
Traction
Traction on snow thanks to the location and depth of the 4mm studs
Easy opening / closing
Laces cover the whole upper. Boots open fully, they're quick & easy to put on!
Fancy some wide open spaces? These warm, waterproof boots are designed for regular hiking in freezing conditions, offering protection and comfort.
